Journey far and wide with the iRide™! This ultra-lightweight scooter is super portable and perfect for traveling. Equipped with both a manual hand brake and supplemental foot brake, the iRide delivers a safe and comfortable ride!
Model Number S25
Weight Capacity 250 lbs.
Turning Radius1 33.5"
Overall Length1,2 38"
Ground Clearance1 1.3" at motor
Per-Charge Range3,6 10.3 miles at 250 lbs.; 12.7 miles at 200 lbs.
Battery Charger 36 volt lithium ion, off-board
Battery Requirements Size (1) 36 volt, 5.2 Ah Lithium ion
Weight 4.5 lbs.
Overall Width 19.25"
Maximum Speed Up to 3.7 mph
Overall Weight Total weight without batteries 42 lbs. (46.5 lbs. with batteries)
Seat to Ground 18"-20"
Front Tires 6.5" solid
Rear Tires 6.75" solid
Weight of heaviest piece 32 lbs. (base only)
Standard seating Type Compact
Weight 10 lbs.
Material Molded plastic
Dimensions 14.75"x 13.5"
Drive System 36 volt brushless hub motor
Dual braking system manual, dual disc
Seat to deck 8.75"-10.75"
Warranty Frame: 2-year limited Drivetrain:1-year limited Electronics: 1-year limited Battery: 6-months
1 Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of + or - 3 %. Dimensions listed are for power base only. Overall measurements will vary based on seating and accessory selections.
2 Without front riggings.
3 Varies with user weight, terrain, battery type, battery condition and tire pressure.
4 Does not include seat or battery weights.
5 Battery weight may vary based on manufacturer.
6 Tested in accordance with ANSI/RESNA, WC Vol. 2, Section 4 and ISO 7176-4 standards. Results derived from theoretical calculations based on battery specifications and drive system performance. Testing conducted at maximum weight capacities. This specification can be subject to a variance of +10%, -5%.
Meeting and Exceeding High Standards for your Peace of Mind.
Your Pride product has undergone thorough product testing to ensure safety, durability and performance.
Our power chairs, scooters and lift chairs are Food & Drug Administration (FDA) approved medical products that require specific testing prior to release for public use.
The testing requirements accepted by the FDA were developed by the American National Standards Institute/Rehabilitation Engineering & Assistive Technology Society of North America (ANSI/RESNA).
The tests are conducted in accordance with the requirements of the ANSI/RESNA Test Standards and complement an additional stringent testing regiment developed by Pride's Research & Development Team.
All products have passed, and in many cases, exceeded test criteria set forth, assuring the high level of quality synonymous with Pride.
Some of the items our testing criteria include are:
Frame: 2-year limited
1- year limited Drivetrain
1-year limited Electronics